Birthday Backpacks

http://stamp-a-licious.blogspot.com/2008/12/birthday-backpacks.html

Hallowe’en Top Note Treat Box

http://jackiestamps4fun.wordpress.com/2008/10/08/halloween-top-note-treat-box/


I made this cute little box like the one I saw here.  It was super easy!  How-to here, but if you want a photo tutorial, please visit previously mentioned link.
It uses one sheet of 8 1/2″ x 11″ paper.  Cut to 8″ x 5 1/2″.  Scoring along the longer side, score at 1″, 3 1/2″, 4 1/2″ & 7″.  Then turn and score each end at 1″.  Fold score lines and cut each tab along the longer side.  Fold to make a “hinged” box.  (Enlarge each photo by clicking on them.  Sorry for the poor photo on the side view, but I wanted to just get this out).

Using the Top Note Bigz Die, run your leftover piece of card stock folded in half like you would a regular sized card, through the Big Shot - only make sure the folded side is just below the perforated marks so it doesn’t cut all the way through.  Then cut in half for 2 sides - top & bottom.
Decorate the top as desired.  Using the Crop-a-dile, place eyelets on each end of the outside of the Top Note in the center.  On the backside of each of the halves, adhere ribbon using sticky strip and run ribbon through eyelet to tie.  Adhere top and bottom of the box with sticky strip.
I distressed a scrap piece of the Ghostly Greetings, added some Chills & Thrills rub-ons, and a tag I had made from the Eat, Drink, & Be Scary stamp set from the Holiday Mini.
I hope you enjoyed it and try making one for yourself!  Thanks for stopping by!

Stamps: Eat, Drink, & Be Scary; Paper: Basic Black & Whisper White card stock, Creepy Crawley DSP; Ink: Kiwi Kiss, Basic Black marker; Accessories: Chills & Thrills rub-ons, small & large tag punches, 1/8″ handheld punch, linen thread, Pumpkin Pie 1/4″ grosgrain ribbon, distressor tool, sticky strip, eyelets, Crop-a-dile, Top Note Bigz Die, Sizzix Big Shot

September weSTAMP Meeting

http://www.confessionsofastampingaddict.com/2008/10/september-westamp-meeting-2.html

 




And now to our swaps! These stampers are SO TALENTED! Wait 'til you see these!! Our theme for this month was Fall/Halloween 3-D item. Here they are!
Nancy Riley:

Toni Santanello:

Jessica Blair:

Leah Sinatra:

Rachele Sanclemente:

Terri Guymon:

Pam Wood:

Jennie Portonova:

Tara Hilde:

Lorri Heiling: I found the tutorial for this candy slide on SCS. It was made by Beate and can be found HERE.

Recipe:

Stamp Set: All Occasions, Itty Bitty Backgrounds

Paper: Naturals Ivory, Basic Black

Ink: Creamy Caramel, Basic Black

Accessories: Googlie Eyes, 5/8" Grosgrain Ribbon, Horizontal Slot Punch, Sticky Strip

This is just a simple party favor that each weSTAMPER got at the meeting last night. There is a mini Hershey bar inside.

mini backpack

http://stamp-a-licious.blogspot.com/2008/09/mini-backpack.html

Prettie Tuesday: Sophia's Backpack

http://creativepad.typepad.com/creative_pad/2008/09/prettie-tuesday-backpack-and-a-color-challenge.html

Mini Backpack

http://www.kerinstamps.com/stampin_with_kerin/2008/09/mini-backpack.html

Cherry Backpack

http://nicolestalker.blogspot.com/2008/09/cherry-backpack.html


 

Back To School

http://thestampingrounds.typepad.com/my_weblog/2008/09/back-to-school.html



Here's how it is made:

1.  I took a 7"x11" piece of cardstock, and scored it crossways at: 1/2", 3-3/4", 4-3/4", 5-3/4", 9" & 10".  I then rotated it to the lengthwise direction, and scored it in at 1-1/2".

2. I cut up each of the crosslines, up 1-1/2" (to that scoreline).  I then trimmed off the 1/2" tab (the first one), and cut each of the sections of two down by half (just to make it a little less bulky to work with).  Now, some people would say to leave them in to add stability, so if you are adding weight to your box, be sure to do that!  Lastly, I trimmed that long 1/2" scored area (the first one), but just adding a little 45 degree angle to each side - makes it easier to line up when you put the box together.

3. I used my Cropadile and punched holes where I wanted my ribbon to be.  *make sure you do this before anything else!  It gets harder if you wait until later - trust me, I know!  (oops)*  I went ahead and put my jumbo eyelets into the bottom holes only, and then threaded them with ribbon, leaving the ends hanging out (I tied a not on the backside, to keep them from coming out.)

4. I assembled the box using sticky strip.  By the way - got a neat tip at convention on this - before you remove the red plastic from the tape, run your bone folder over it, and it will loosen it from the tape, making it easier to remove.  Who knew?! :)
By the way, just a little note: whenever I make a box, when I put the bottom edge together, I always make sure that the flap that is attached to the FRONT SIDE goes on last - it just makes it a little nicer looking, especially when the flaps are close in size. 

5. Ok, the box is almost done.  Let's put it aside for a moment and take out our BigShots (don't have one?  Join my new Sizzix Club, and get it and a swack of other stuff at a discount!  See my CLUBS page for details!) Get out your TopNotes and Bigz Scallop Envelope dies (2 different dies).  I used the Summer Picnic paper and Real Red Cardstock, and I diecut one of each, with each die.  Here's the result:

*note that the envelope is best created using the 'Crease Pad' - just put the crease pad on top instead of the plastic sheet, and roll it through - you'll get better scorelines that way*
6. Ok, now you can't see it so well in the pics above (try clicking on them to make them bigger), but there is a perforated line in each of them to make them mounted, if you want.  Well, we want!  So, I trimmed the designer paper's perforated line, so they would mount perfectly - here are the results:
I repeated this with the Topnote one as well.  By the way, I use Tombow only these days when mounting paper - it just works like nobody's business, and it ain't movin' once it's stuck! :)
7. Ok - now I marked my holes in the box, onto the lid (the top note).  I punched these separately, and actually mounted my jumbo eyelets in the top note BEFORE I attached it to the box.  Makes it a heck of a lot easier, and no one would notice anyway!
And then attached it using, you guessed it, Tombow to the box. 
8. I then threaded the ribbons through the holes, and tied a knot inside.  Note that I pulled the ribbon ALL THE WAY OUT FIRST, and then made the knots even with each other, so I knew the straps would be even.

9. Ok, box finished, I now turned my attention to the little 'pocket' for the front.  Now, some folks are making theirs a bit more 3D, and adding one more scoreline to the envelope.  As I have several to do, and little time, I'm just leaving the envelope as is - consider it an option though!  I used my 1/16" circle punch to punch a hole through the middle for my brad - it's easier if you do this before you fully assemble the pouch.  I then put it aside, and turned my attention toward the brad itself. 
Ok - I grabbed a silver brad (the new ones on page 184 - LOVE them!).  I also grabbed one of my little real red craft ink spots.  Here's the cute part - Ry was my 'model' for this (he took pics of me for other parts of this too, btw!) - cute, eh?  Anyway, use your 'brad' as a stamp, and stamp it into the ink.  Then wipe it off.  Stamp it again, wipe it off - do this several times, and you will get a matching brad for your project!  What more appropriate than a star for the teacher?!  :)

Mount that puppy to your mini envelope, and then finish your envelope with sticky tape:
sorry for the icky lens - that's what you get for letting your 5 year old take pics all day with it! :)
10. Ok - mount that baby to the box using sticky tape.  Last but not least, make the medallion for the front!  I used the scallop circle punch, the 1-3/8" circle punch, and the 1-1/4" punch.  I made the apple using the 'Tart and Tangy' stampset, and I recommend Real Red Craft Ink (so the colour runs less), and a green marker of your choice. 
Once your image has dried, use your crystal effects to create the 'shiny apple' look - you'll want to bite into it when you're done!!  When it's dry, punch it out, mount it on dimensionals, and voila!  Your teacher's gift is done! 

Add in the teacher gifts (tylonal, chocolate, cute sticky notes, hershey's kisses, etc), and you have your teacher's gift!  Enjoy!!

Stationery Box Video Tutorial

http://danniesdesigns.typepad.com/my_weblog/2008/09/stationery-box.html

from Dannie's Designs by Dannie Graves

Back in June I offered this stationery box as my class project. 



It was such a hit that I decided to make a video tutorial.  Normally when I post a video tutorial I also type out all of the dimensions, score lines, etc.  Well, this project was so involved and has so many pieces that I decided to make a pattern for you to download.
Stationery Box Patterns.pdf

How fun is this???

 

http://stampwithheather.typepad.com/stamp_with_heather/2008/09/how-fun-is-this.html







Here are the basic dimensions that I used.  Not sure what else is out there for patterns as I just eyeballed this one.....

Pumpkin Pie: 8 1/2 x 7 1/2 scored at 2 inches along the bottom and the two sides (two of these are needed...these are the front and the back of the package), 3 1/2 x 5 1/2 for the flap scored at 2 inches (I used the Coluzzle to curve the flap front)

Create a tab from the bottom two 2x2 squares on the pumpkin pie cs by cutting one edge of the square off.  These two pieces of Pumpkin Pie make a bag front and a bag back that assemble together.  After they are attached, I creased the bag as you would for a 2x4x6x8 box.  Then attach the flap from the back.
Designer Series Paper: 3 1/4 x 6 1/4 for the front and 3 1/4 x 3 1/2 for the flap.  I used magnetic snaps to hold the flap down.  Have fun!

Mint Boxes

http://impressionsbyrochelle.blogspot.com/2008/09/mint-boxes.html

from Impressions by impressionsbyrochelle@frontiernet.net (Rochelle W)

I made these cute little boxes the other day and was trying to figure out what to put in them. I tried two peppermint patty sammiches and they fit perfectly. Woo Hoo!! The boxes are super easy to make too. Cut card stock for the bottom 4 x 4 and score 1 & 1/16 inch all around. Cut pattern paper for the lid 3 x 3 score 1/2 inch all around. For the lid I took a 1 3/8 square punch and punched out the center. Because of this size cover, you can put the punch in all the way and it will be perfectly centered. I cut the acetate for the middle insert 2 x 2. Adhere the acetate to the underside of the lid then cut the flaps on the top and bottom and put it together to form a box and lid. Easy peasy lemon squeezy. LOL
Here is a link to the directions as well.
Stamps: True Friend
Paper: Pacific Point, Whisper White, Pacific Point Designer Prints
Ink: Pacific Point
Accessories: Scor-Pal, Acetate, Square Punch, SU Scallop Punch, SU Circle Punch, Glue Dots, York Peppermint Patty, Bling