mini backpack

http://stamp-a-licious.blogspot.com/2008/09/mini-backpack.html

Prettie Tuesday: Sophia's Backpack

http://creativepad.typepad.com/creative_pad/2008/09/prettie-tuesday-backpack-and-a-color-challenge.html

Mini Backpack

http://www.kerinstamps.com/stampin_with_kerin/2008/09/mini-backpack.html

Cherry Backpack

http://nicolestalker.blogspot.com/2008/09/cherry-backpack.html


 

Back To School

http://thestampingrounds.typepad.com/my_weblog/2008/09/back-to-school.html



Here's how it is made:

1.  I took a 7"x11" piece of cardstock, and scored it crossways at: 1/2", 3-3/4", 4-3/4", 5-3/4", 9" & 10".  I then rotated it to the lengthwise direction, and scored it in at 1-1/2".

2. I cut up each of the crosslines, up 1-1/2" (to that scoreline).  I then trimmed off the 1/2" tab (the first one), and cut each of the sections of two down by half (just to make it a little less bulky to work with).  Now, some people would say to leave them in to add stability, so if you are adding weight to your box, be sure to do that!  Lastly, I trimmed that long 1/2" scored area (the first one), but just adding a little 45 degree angle to each side - makes it easier to line up when you put the box together.

3. I used my Cropadile and punched holes where I wanted my ribbon to be.  *make sure you do this before anything else!  It gets harder if you wait until later - trust me, I know!  (oops)*  I went ahead and put my jumbo eyelets into the bottom holes only, and then threaded them with ribbon, leaving the ends hanging out (I tied a not on the backside, to keep them from coming out.)

4. I assembled the box using sticky strip.  By the way - got a neat tip at convention on this - before you remove the red plastic from the tape, run your bone folder over it, and it will loosen it from the tape, making it easier to remove.  Who knew?! :)
By the way, just a little note: whenever I make a box, when I put the bottom edge together, I always make sure that the flap that is attached to the FRONT SIDE goes on last - it just makes it a little nicer looking, especially when the flaps are close in size. 

5. Ok, the box is almost done.  Let's put it aside for a moment and take out our BigShots (don't have one?  Join my new Sizzix Club, and get it and a swack of other stuff at a discount!  See my CLUBS page for details!) Get out your TopNotes and Bigz Scallop Envelope dies (2 different dies).  I used the Summer Picnic paper and Real Red Cardstock, and I diecut one of each, with each die.  Here's the result:

*note that the envelope is best created using the 'Crease Pad' - just put the crease pad on top instead of the plastic sheet, and roll it through - you'll get better scorelines that way*
6. Ok, now you can't see it so well in the pics above (try clicking on them to make them bigger), but there is a perforated line in each of them to make them mounted, if you want.  Well, we want!  So, I trimmed the designer paper's perforated line, so they would mount perfectly - here are the results:
I repeated this with the Topnote one as well.  By the way, I use Tombow only these days when mounting paper - it just works like nobody's business, and it ain't movin' once it's stuck! :)
7. Ok - now I marked my holes in the box, onto the lid (the top note).  I punched these separately, and actually mounted my jumbo eyelets in the top note BEFORE I attached it to the box.  Makes it a heck of a lot easier, and no one would notice anyway!
And then attached it using, you guessed it, Tombow to the box. 
8. I then threaded the ribbons through the holes, and tied a knot inside.  Note that I pulled the ribbon ALL THE WAY OUT FIRST, and then made the knots even with each other, so I knew the straps would be even.

9. Ok, box finished, I now turned my attention to the little 'pocket' for the front.  Now, some folks are making theirs a bit more 3D, and adding one more scoreline to the envelope.  As I have several to do, and little time, I'm just leaving the envelope as is - consider it an option though!  I used my 1/16" circle punch to punch a hole through the middle for my brad - it's easier if you do this before you fully assemble the pouch.  I then put it aside, and turned my attention toward the brad itself. 
Ok - I grabbed a silver brad (the new ones on page 184 - LOVE them!).  I also grabbed one of my little real red craft ink spots.  Here's the cute part - Ry was my 'model' for this (he took pics of me for other parts of this too, btw!) - cute, eh?  Anyway, use your 'brad' as a stamp, and stamp it into the ink.  Then wipe it off.  Stamp it again, wipe it off - do this several times, and you will get a matching brad for your project!  What more appropriate than a star for the teacher?!  :)

Mount that puppy to your mini envelope, and then finish your envelope with sticky tape:
sorry for the icky lens - that's what you get for letting your 5 year old take pics all day with it! :)
10. Ok - mount that baby to the box using sticky tape.  Last but not least, make the medallion for the front!  I used the scallop circle punch, the 1-3/8" circle punch, and the 1-1/4" punch.  I made the apple using the 'Tart and Tangy' stampset, and I recommend Real Red Craft Ink (so the colour runs less), and a green marker of your choice. 
Once your image has dried, use your crystal effects to create the 'shiny apple' look - you'll want to bite into it when you're done!!  When it's dry, punch it out, mount it on dimensionals, and voila!  Your teacher's gift is done! 

Add in the teacher gifts (tylonal, chocolate, cute sticky notes, hershey's kisses, etc), and you have your teacher's gift!  Enjoy!!

Stationery Box Video Tutorial

http://danniesdesigns.typepad.com/my_weblog/2008/09/stationery-box.html

from Dannie's Designs by Dannie Graves

Back in June I offered this stationery box as my class project. 



It was such a hit that I decided to make a video tutorial.  Normally when I post a video tutorial I also type out all of the dimensions, score lines, etc.  Well, this project was so involved and has so many pieces that I decided to make a pattern for you to download.
Stationery Box Patterns.pdf

How fun is this???

 

http://stampwithheather.typepad.com/stamp_with_heather/2008/09/how-fun-is-this.html







Here are the basic dimensions that I used.  Not sure what else is out there for patterns as I just eyeballed this one.....

Pumpkin Pie: 8 1/2 x 7 1/2 scored at 2 inches along the bottom and the two sides (two of these are needed...these are the front and the back of the package), 3 1/2 x 5 1/2 for the flap scored at 2 inches (I used the Coluzzle to curve the flap front)

Create a tab from the bottom two 2x2 squares on the pumpkin pie cs by cutting one edge of the square off.  These two pieces of Pumpkin Pie make a bag front and a bag back that assemble together.  After they are attached, I creased the bag as you would for a 2x4x6x8 box.  Then attach the flap from the back.
Designer Series Paper: 3 1/4 x 6 1/4 for the front and 3 1/4 x 3 1/2 for the flap.  I used magnetic snaps to hold the flap down.  Have fun!

Mint Boxes

http://impressionsbyrochelle.blogspot.com/2008/09/mint-boxes.html

from Impressions by impressionsbyrochelle@frontiernet.net (Rochelle W)

I made these cute little boxes the other day and was trying to figure out what to put in them. I tried two peppermint patty sammiches and they fit perfectly. Woo Hoo!! The boxes are super easy to make too. Cut card stock for the bottom 4 x 4 and score 1 & 1/16 inch all around. Cut pattern paper for the lid 3 x 3 score 1/2 inch all around. For the lid I took a 1 3/8 square punch and punched out the center. Because of this size cover, you can put the punch in all the way and it will be perfectly centered. I cut the acetate for the middle insert 2 x 2. Adhere the acetate to the underside of the lid then cut the flaps on the top and bottom and put it together to form a box and lid. Easy peasy lemon squeezy. LOL
Here is a link to the directions as well.
Stamps: True Friend
Paper: Pacific Point, Whisper White, Pacific Point Designer Prints
Ink: Pacific Point
Accessories: Scor-Pal, Acetate, Square Punch, SU Scallop Punch, SU Circle Punch, Glue Dots, York Peppermint Patty, Bling

Back 2 School!

http://lwdesigns.blogspot.com/2008/09/back-2-school.html

Mini Backpack Tutorial

http://inkingidaho.blogspot.com/2008/09/start-with-piece-of-cardstock-measuring.html
 http://inkingidaho.blogspot.com/2008/09/blog-post.html
 http://inkingidaho.blogspot.com/2008/09/upclose-of-oval-coluzzle-template.html

Start with a piece of cardstock measuring 10 1/4" x 5 1/4". Score lengthwise at 3 1/2". Turn and score the short side at 3", 4 3/4", 7 3/4" and 9 1/2". Cut the sections for the bottom of the box, up to the score line, as shown above.

You'll need additional pieces of cardstock for the pocket, pocket flap and backpack flap.

Pocket is 3" x 2". Score at 1/4" and 1/2" on three sides. Cut corners off as shown above.

Pocket flap is 1 1/2" x 2". Score at 1/4" and 1/2" on one long side only.

Backpack flap is 2 15/16" x 2 1/2. Score at 1/2" on long side only. (Not to confuse you, but you could cut this piece 3" x 2 1/2" if it is easier, then cut a fraction of the edge off so it fits inside the backpack).

http://inkingidaho.blogspot.com/2008/09/blog-post.html

This is what it looks like on the inside with the ribbons through the holes.

Attach with a little piece of Sticky Strip.

Back view

This is the back of the little pocket, nice and blurry :o), just before you attach it.

This is the finished backpack. Now you can accessorize it anyway you want! enjoy!

http://inkingidaho.blogspot.com/2008/09/upclose-of-oval-coluzzle-template.html

Upclose of the oval Coluzzle template cutting the backpack flap on the 6th line from the center.Backpack flap needs 1/8" holes at the score line for a ribbon, about 1" from each edge. You'll also need to punch holes on the section that you adhesive to the backpack so the ribbons will go through both sections.

Upclose of the oval Coluzzle template cutting the pocket flap on the 4th line from the center. Pocket should look similar to this before you put it together. Lay a piece of DSP over the flap and pocket tops. Add adhesive and cut around the half circle to cover.

Fold on all score lines. Gently bend the sides in so you can close the backpack at the top, you know, squish the tops of the sides!

Use your 1/8" hole punch to punch 2 holes at the top, side by side in the center about 1/2" down and 2 holes at the bottom, about 1/2" from the edge and bottom equally.

You'll need about 6" of ribbon for the backpack straps x2 and about 8" of the ribbon you use for the top loop. Make sure you have enough ribbon to get your fingers in there and tie a knot! I don't know, maybe I learned that from experience :o)

Another Mini Backpack & One That Went Seriously Bad!

http://inkingidaho.blogspot.com/2008/09/ive-been-so-pleased-and-overwhelmed-by.html